41 440/122 ED 1/12 41 440/122 ED DSP1* DIRECTIONAL VALVES, PILOT OPERATED, SOLENOID OR HYDRAULIC (DSC1*) ACTUATED — The DSP10 and DSP11 are 4-ports directional valves, pilot operated, solenoid actuated, with mounting surface according to ISO 4401-10 standards. The DS*11 valves have ports Ø48. — The directional valves DSC10 and DSC11 are the versions with hydraulic actuation. — They are available with different spool types (see point 2) and with some options for the opening control. — The DSP* valves are available with internal or external pilot supply and internal or external drain. A version…
File type: application/pdf
Referenced at:
41 430/123 ED 1/14 41 430/123 ED — The DSP8 are 4-ports directional valves, pilot operated, solenoid actuated, with mounting surface according to ISO 4401-08 standards. — DSC8 are the hydraulic actuated versions. — A high pressure version (H) is available. — These valves are available with different spool types (see points 2 and 3), with some options for the opening control. — They are available also with zinc-nickel surface treatments, that ensure a salt spray resistance up to 600 hours. MOUNTING INTERFACE DSP8 DSP8H Maximum operating pressure - ports P - A - B - port T (external drainage) -…
File type: application/pdf
Referenced at:
41 410/123 ED 1/14 41 410/123 ED — The DSP5 and DSP5R are 4-ports directional valves, pilot operated, solenoid actuated, with mounting surface according to ISO 4401-05 standards. — DSC5 are the hydraulic actuated versions. — A high pressure version (H) is available. — These valves are available with different spool types (see points 2 and 3), with some options for the opening control. — They are available also with zinc-nickel surface treatments, that ensure a salt spray resistance up to 600 hours. DSP5 DSP5H Maximum operating pressure - ports P - A - B - port T (external drainage) - port T…
File type: application/pdf
Referenced at:
SV Solenoid Valves Technical Information AI423955357826en-000101 • August 2022 PERFORMANCE CURVES APPLICATIONS OPERATION SPECIFICATIONS SCHEMATIC 2-Way Poppet (Low Power, High Flow) SLP13-10-C/O 1 2 1 2 1-2 20 60 100 De-Energized 3 9 6 12080 l/min400 15 12 Pressure drop US gal/min3224168 psi bar 0 0 150 225 75 21.8 cSt [105 SUS] hyd.oil at 49°C [120 °F] 2-1 Energized Rated pressure* 350 bar [5075 psi] Rated flow at 7 bar [100 psi] 79 l/min [21 US gal/min] Leakage 10 drops/min @ Rated Pressure Weight 0.16 kg [0.35 lb] Cavity SDC10-2, C-10-2 Oil Temperature Range -40 to 100 °C (-40 to 212 °F)…
File type: application/pdf
Referenced at:
82 230/224 ED 1/6 QDE3GL PROPORTIONAL COMPENSATED FLOW CONTROL VALVE WITH INTEGRATED ELECTRONICS 82 230/224 ED — QDE3GL are proportional pressure-compensated flow control valves with on-board electronics and mounting surface according to ISO 6263-03. Depending on the presence of the P port in the mounting surface, they can operate as either 2- or 3-port flow control valves. — These valves are suitable for controlling flow in sub- systems of a hydraulic circuit or for controlling the speed of a hydraulic cylinder. — These valves are equipped with compact integrated electronics, with analogue or…
File type: application/pdf
Referenced at:
81 101/121 ED 1/6 — The PLKE08 valve is a proportional pressure control valve, direct operated, cartridge type. They can be used in blocks and manifolds with SAE-08 seat. — The valve is suitable as a pilot stage for remote control of two stage pressure control and reducing valves. — The design of this valve has a mechanical pressure limitation feature for higher safety of the application. — The valve can be controlled directly by a current control supply unit or combined with an external electronic card to maximize the valve performances (see point 11). — The valve is available in four…
File type: application/pdf
Referenced at:
43 105/124 ED 1/14 43 105/124 ED KT* SOLENOID OPERATED CARTRIDGE, POPPET TYPE SERIES 1 OPERATING PRINCIPLE — The KT* are 2-port pilot operated poppet valves, actuated by solenoid. They are available in three nominal sizes, in normally closed versions (NC) and in normally open versions (NO). — Single flow, reverse flow and double seal designs are available, with maximum flow rate up to 150 l/min. — KT* valves ensure a low internal leakage, which decreases while the pressure increases. — Coils for DC power supply with standard connection type EN 175301-803 (ex DIN 43650), AMP Junior or DEUTSCH…
File type: application/pdf
Referenced at:
125 12 5 4 Mounting Holes Ø10 Gauge Port Throttle Valve Pressure Switch System Relief Valve Control Valve Relief Valve Accumulator Motor Pump 190 25 5 (w ith B 1 op tio n) 30 0 (w ith B 2 op tio n) 534 (0.55kW motor selection) 610 (1.5kW motor selection) 27 2 (w /o ut te rm in al b ox ) 34 6 (w ith te rm in al b ox ) TerminalBox Oil Filler Cap Brake Port 1/4” BSP Suction Filter 1. General Description The “LC” range of Electro-Hydraulic Power Units are designed to provide a basic brake on / off control system for the Twiflex MR, MX, GMX, GMR and VCS spring applied hydraulically released…
File type: application/pdf
Referenced at:
81 515/121 ED 1/8 — ZDE3K* are direct operated pressure reducing valves, with electric proportional control, with ISO 4401-03 mounting surface. — They are compliant with ATEX, IECEx, INMETRO or PESO requirements and are suitable for use in potentially explosive atmospheres, for surface plants or mines. — A low temperature version (up to - 40 °C) is also available. — The valves are used to reduce pressure in the secondary circuit branches thus ensuring stability of controlled pressure in the event of variations of the flow rate through the valve. — ZDE3K* valves are supplied with a finishing…
File type: application/pdf
Referenced at:
81 506/121 ED 1/4 — PZME3 valves are three-port pressure reducing valves, pilot operated, with proportional control. They are designed in modular version with mounting interface in compliance with ISO 4401-03 standards. — These valves reduce pressure in the secondary branches of the circuit thus ensuring stability of controlled pressure in the event of variations in the flow rate through the valve. — The valve can be controlled directly by a current control supply unit or by an electronic control card, to maximize the valve performance (see point. 8). — The PZME3 valve is available in three…
File type: application/pdf
Referenced at:
